1 The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with 3M 9448A adhesive on the back. The PEI comes pre-applied.
2 The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 120℃ on the bed.
3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model stick onto the sheet. You do not need to worry about the prints curling at a 60℃ bed temperature. And if you want to print PETG you may need to set the hotbed 80-85 ℃.
4 Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
There are different sizes for them:
220x220mm（8.668.66inch) it is applicable with Anet A8 Wanhao Duplicator i3 Monoprice Maker and other same size printers.
235*235mm（9.25*9.25inch）it is applicable with Creality 3D printers such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and other same size printers. Please notice that the hotbed sizes for them are 235*235mm but not 220*220mm.
310x310mm（12.2x12.2inch) it is applicable with Creality CR-10, CR-10S, and other same-size printers.
310x320mm（12.2x12.2inch) it is applicable with Creality CR-10S Pro v2, ender 3 max, and other same size printers.
410*410mm（16.1*16.1inch）, it is applicable with Creality 3D printer such as Creality CR-10 S4/CR-6 Max and other same size 3D Printers
Package included: 1 x Steel platform with PEI flexible surface
1 x Magnetic bottom sheet with Adhesive