Dual Independent Extruder

Sold out


Also available in Amazon |   Free Shipping in US


Key Features

4.3inch LCD Touch Screen Display, easy to operate. This 2019 new upgrade type D3 HERO 3D PRINTER is an all-in-one machine, moving all components into a compact base under the printing bed. Save more space for you.

Duplicator Printer: You can use your D3 HERO 3D PRINTER to print Two-Color/Duplicate/Mirror Model. The maximum print size is 300*300*350mm.

Simultaneous Nozzle Temperature: HICTOP D3 Hero 3D Printer works on several materials, such as 1.75mm PLA,TPU,PVA,PP, ABS, Wood and so on. The maximum printing speed is 180mm/s, recommended print speed is 50mm/s (Specifically to set up according to your model)

Dual Z Axis Design: The dual extruders avoid the problem of leftover material contamination compared to single extruder. The X-axis guide rail help a lot with improving the accuracy. Photoelectric limit switch will calibrate continuously during printing to make it more accurate.

Filaments and Nozzles

The HICTOP D3 HERO supports a wide range of materials based on your requirements. With its nozzle that can withstand a heat at up to 482º F (250º C), the HICTOP D3 HERO can support PLA,TPU,PVA,PP, ABS, Wood, Flexible, Nylon and Hips materials.

The HICTOP D3 HERO uses a Standard 0.4mm nozzle and can be modified to different HICTOP nozzle sizes of 0.2, 0.3, 0.6 and 0.8mm respectively (sold separately).

Files and Softwares

HICTOP D3 HERO supports operating system STL, OBJ, Gcode and JPG files. An SD memory slot is located at the control system so you can access and print any supporting files independently without plugging in to your computer. D3 HERO supports 3D softwares such as: CURA、Repetier-Host and simplify 3D.

 

NOTE TO CONSUMER:
Packages shipped internationally may be subject to import taxes, customs duties, and/or fees imposed by the destination country. These charges will typically be due once the shipped goods arrive at the country of destination.
You are responsible with ensuring to comply with laws and regulations of the country of destination. HICTOP does not have any responsibility on these additional charges that may apply.
Certain countries may require documentation (i.e. declaration of value) before the items are sent. If required information is not provided, this may result in delays in the order.
For any questions about declared values, please contact us after you placed your order

Thank you!

TECH SPECS

Product forming size: 300*300*350mm

Machine size: 580*520*590mm

Layer thickness: 0.1~0.4mm (available)

Nozzle diameter: 0.4mm (Can replace to 0.2mm 0.3mm 0.5mm)

Print speed: 180mm/s, recommended print speed is 50mm/s (Specifically to set up according to your model)

Print material: 1.75mm PLA, ABS,Nylon,PVA,PP,TPU,Wood ect.

Support File format: STL, obj, g-code, JPG etc.

Support 3d software: UG, Pro/E, 3D Max, Solidworks, rhinoceros, etc.

Connect: USB, support SD card directly print

Accuracy: ± 0.1mm

Compatibility: Linux, Windows and Mac

Machine weight: 19kg


Dual Independent Extruder


Sold out

- Available in Amazon |  Free Shipping in US

Key Features

  • 4.3inch LCD Touch Screen Display, easy to operate. This 2019 new upgrade type D3 HERO 3D PRINTER is an all-in-one machine, moving all components into a compact base under the printing bed. Save more space for you.
  • Duplicator Printer: You can use your D3 HERO 3D PRINTER to print Two-Color/Duplicate/Mirror Model. The maximum print size is 300*300*350mm.
  • Simultaneous Nozzle Temperature: HICTOP D3 Hero 3D Printer works on several materials, such as 1.75mm PLA,TPU,PVA,PP, ABS, Wood and so on. The maximum printing speed is 180mm/s, recommended print speed is 50mm/s (Specifically to set up according to your model)
  • Dual Z Axis Design: The dual extruders avoid the problem of leftover material contamination compared to single extruder. The X-axis guide rail help a lot with improving the accuracy. Photoelectric limit switch will calibrate continuously during printing to make it more accurate.

Filaments and Nozzles

The HICTOP D3 HERO supports a wide range of materials based on your requirements. With its nozzle that can withstand a heat at up to 482º F (250º C), the HICTOP D3 HERO can support PLA,TPU,PVA,PP, ABS, Wood, Flexible, Nylon and Hips materials.

The HICTOP D3 HERO uses a Standard 0.4mm nozzle and can be modified to different HICTOP nozzle sizes of 0.2, 0.3, 0.6 and 0.8mm respectively (sold separately).

Files and Softwares

HICTOP D3 HERO supports operating system STL, OBJ, Gcode and JPG files. An SD memory slot is located at the control system so you can access and print any supporting files independently without plugging in to your computer. D3 HERO supports 3D softwares such as: CURA、Repetier-Host and simplify 3D.

NOTE TO CONSUMER:
Packages shipped internationally may be subject to import taxes, customs duties, and/or fees imposed by the destination country. These charges will typically be due once the shipped goods arrive at the country of destination.
You are responsible with ensuring to comply with laws and regulations of the country of destination. HICTOP does not have any responsibility on these additional charges that may apply.
Certain countries may require documentation (i.e. declaration of value) before the items are sent. If required information is not provided, this may result in delays in the order.
For any questions about declared values, please contact us after you placed your order

Thank you

TECHNICAL SPECIFICATIONS

Product forming size: 300*300*350mm

Machine size: 580*520*590mm

Layer thickness: 0.1~0.4mm (available)

Nozzle diameter: 0.4mm (Can replace to 0.2mm 0.3mm 0.5mm)

Print speed: 180mm/s, recommended print speed is 50mm/s (Specifically to set up according to your model)

Print material: 1.75mm PLA, ABS,Nylon,PVA,PP,TPU,Wood ect.

Support File format: STL, obj, g-code, JPG etc.

Support 3d software: UG, Pro/E, 3D Max, Solidworks, rhinoceros, etc.

Connect: USB, support SD card directly print

Accuracy: ± 0.1mm

Compatibility: Linux, Windows and Mac

Machine weight: 19kg