Massive Beast Printer
Form Factors
HICTOP CR-10s5 is a must have to all Professional 3D printers. It is a pre-assembled aluminum frame is easy to setup to make you work faster, and smarter.
CR-10s5 has a dimensions of 31.5 x 31.1 x 30 inches (800mm x 790mm x 710mm). It comes along with a system box which controls all the settings from preparation to heating requirements. CR-10s5 is a massive 3D printer for a massive print volume, it’s a professional grade printer and weighs 48.5 lbs (22 Kg)
Printing Facts and Features
HICTOP CR-10s5 uses FDM (Fused Deposition Modeling) method with the speed could go up to 100mm/s.
CR-10s5 comes with a 20 x 20 inch (510mm x 510mm) heatbed this massive heatbed can produce an enormous printing volume of 19.7” x 19.7” x 19.7” (500mm x 500mm x 500mm). That is a total massive volume of 7645 cu in.!
With the said print volume capacity, HICTOP CR-10s5 is a real beast!. CR-10s5 is ideal for home and professional projects
Special Features
HICTOP CR-10s5 comes with Filament Monitor and uses Dual Z rods. CR-10s5 has the ability to resume printing from where it left after power failure. HICTOP CR-10s5 can print a massive volume of 19.7” x 19.7” x 19.7” (500mm x 500mm x 500mm)
Filaments and Nozzles
The HICTOP CR-10s5 supports a wide range of materials based on your requirements. With its nozzle that can withstand a heat at up to 482º F (250º C), the HICTOP CR-10s5 can support PLA, ABS, Wood, Flexible, Nylon and Hips materials.
The HICTOP CR-10s5 uses a Standard 0.4mm nozzle and can be modified to different HICTOP nozzle sizes of 0.2, 0.3, 0.6 and 0.8mm respectively (sold separately).
Files and Softwares
HICTOP CR-10s5 supports operating system STL, OBJ, Gcode and JPG files. An SD memory slot is located at the control system so you can access and print any supporting files independently without plugging in to your computer. HICTOP CR-10s4 supports 3D softwares such as: CURA、Repetier-Host and simplify 3D.
NOTE TO CONSUMER:
Packages shipped internationally may be subject to import taxes, customs duties, and/or fees imposed by the destination country. These charges will typically be due once the shipped goods arrive at the country of destination.
You are responsible with ensuring to comply with laws and regulations of the country of destination. HICTOP does not have any responsibility on these additional charges that may apply.
Certain countries may require documentation (i.e. declaration of value) before the items are sent. If required information is not provided, this may result in delays in the order.
For any questions about declared values, please contact us after you placed your order
Thank you
TECHNICAL SPECIFICATIONS
BUILD FACTORS
Printing Method :FDM (Fused Deposition Modeling)
Structure: Full Frame Aluminum
Weight: 48.5 lbs (22 Kg)
Product Dimension: 31.5 x 31.1 x 30 inches (800mm x 790mm x 710mm)
Packaging Dimension: 32.6 x 29.1 x 11.8 inches (830mm x 740mm x 300mm)
Heatbed Dimension: 20 x 20 inch (510mm x 510mm)
PRINT FEATURES
Maximum Printing Volume: 19.7” x 19.7” x 19.7” (500mm x 500mm x 500mm)
Nozzle Diameter: 0.4mm default. Interchangeable to 0.2/0.3/0.6/0.8mm (Sold Separately)
Nozzle Max Temperature: ~ 482º F (250º C)
Heatbed Max Temperature: ~ 212º F (100º C)
Filament Compatibility: PLA, ABS, Wood, Flexible, Nylon, Hips
Supported Files: STL, OBJ, G-code, JPG
Supported Software: CURA、Repetier-Host simplify 3D
Special Features: Filament Monitor, Dual Z-Rods, Power-Fail Resume
MODEL COMPARISON
| MODEL | COLORS | FRAME | WEIGHT | FILAMENT | PRINT VOLUME | AUTO LEVELING | FILAMENT MONITOR | OTHER |
|
CR-10 |
Black-Blue |
Aluminum |
29.3 lbs (13.3Kg) |
PLA, ABS, Wood, Nylon, HIPS, Flexible |
11.8” x 11.8” x 15.75” (300mm x 300mm x 400mm) |
No |
No |
N/A |
|
CR-10s |
Black-Silver |
Aluminum |
29.3 lbs (13.3Kg) |
PLA, ABS, Wood, Nylon, HIPS, Flexible |
11.8” x 11.8” x 15.75” (300mm x 300mm x 400mm) |
No |
Yes |
Power Fail Resume; Dual Z-Ro |
|
CR-10s4 |
Black-Silver |
Aluminum |
39.6 lbs (18 Kg) |
PLA, ABS, Wood, Nylon, HIPS, Flexible |
15.75” x 15.75” x 15.75” (400mm x 400mm x 400mm) |
No |
Yes |
Power Fail Resume; Dual Z-Ro |
|
CR-10s5 |
Black-Silver |
Aluminum |
48.5 lbs (22 Kg |
PLA, ABS, Wood, Nylon, HIPS, Flexible |
19.7” x 19.7” x 19.7” (500mm x 500mm x 500mm) |
No |
Yes |
Power Fail Resume; Dual Z-Ro |
SUPPORT
User's Manual
Latest Firmware:
GALLERY
You might also like:
Sold out
Sold out
Sold out
Sold out
Sold out
Massive Beast Printer
Sold out
Available in US and Australia ONLY | Free Shipping in US
**To avoid International Shipping fee,please purchase this item using Amazon per country location
Form Factor
HICTOP CR-10s5 is a must have to all Professional 3D printers. It is a pre-assembled aluminum frame is easy to setup to make you work faster, and smarter.
CR-10s5 has a dimensions of 31.5 x 31.1 x 30 inches (800mm x 790mm x 710mm). It comes along with a system box which controls all the settings from preparation to heating requirements. CR-10s5 is a massive 3D printer for a massive print volume, it’s a professional grade printer and weighs 48.5 lbs (22 Kg)
Printing Facts and Features
HICTOP CR-10s5 uses FDM (Fused Deposition Modeling) method with the speed could go up to 100mm/s.
CR-10s5 comes with a 20 x 20 inch (510mm x 510mm) heatbed this massive heatbed can produce an enormous printing volume of 19.7” x 19.7” x 19.7” (500mm x 500mm x 500mm). That is a total massive volume of 7645 cu in.!
With the said print volume capacity, HICTOP CR-10s5 is a real beast!. CR-10s5 is ideal for home and professional projects.
Special Features
HICTOP CR-10s5 comes with Filament Monitor and uses Dual Z rods. CR-10s5 has the ability to resume printing from where it left after power failure. HICTOP CR-10s5 can print a massive volume of 19.7” x 19.7” x 19.7” (500mm x 500mm x 500mm)
Filaments and Nozzles
The HICTOP CR-10s5 supports a wide range of materials based on your requirements. With its nozzle that can withstand a heat at up to 482º F (250º C), the HICTOP CR-10s5 can support PLA, ABS, Wood, Flexible, Nylon and Hips materials.
The HICTOP CR-10s5 uses a Standard 0.4mm nozzle and can be modified to different HICTOP nozzle sizes of 0.2, 0.3, 0.6 and 0.8mm respectively (sold separately).
Files and Softwares
HICTOP CR-10s5 supports operating system STL, OBJ, Gcode and JPG files. An SD memory slot is located at the control system so you can access and print any supporting files independently without plugging in to your computer. HICTOP CR-10s4 supports 3D softwares such as: CURA、Repetier-Host and simplify 3D.
NOTE TO CONSUMER:
Packages shipped internationally may be subject to import taxes, customs duties, and/or fees imposed by the destination country. These charges will typically be due once the shipped goods arrive at the country of destination.
You are responsible with ensuring to comply with laws and regulations of the country of destination. HICTOP does not have any responsibility on these additional charges that may apply.
Certain countries may require documentation (i.e. declaration of value) before the items are sent. If required information is not provided, this may result in delays in the order.
For any questions about declared values, please contact us after you placed your order
Thank you!
TECHNICAL SPECIFICATIONS
BUILD FACTORS
Printing Method :FDM (Fused Deposition Modeling)
Structure: Full Frame Aluminum
Weight: 48.5 lbs (22 Kg)
Product Dimension: 31.5 x 31.1 x 30 inches (800mm x 790mm x 710mm)
Packaging Dimension: 32.6 x 29.1 x 11.8 inches (830mm x 740mm x 300mm)
Heatbed Dimension: 20 x 20 inch (510mm x 510mm)
PRINT FEATURES
Maximum Printing Volume: 19.7” x 19.7” x 19.7” (500mm x 500mm x 500mm)
Nozzle Diameter: 0.4mm default. Interchangeable to 0.2/0.3/0.6/0.8mm (Sold Separately)
Nozzle Max Temperature: ~ 482º F (250º C)
Heatbed Max Temperature: ~ 212º F (100º C)
Filament Compatibility: PLA, ABS, Wood, Flexible, Nylon, Hips
Supported Files: STL, OBJ, G-code, JPG
Supported Software: CURA、Repetier-Host simplify 3D
Special Features: Filament Monitor, Dual Z-Rods, Power-Fail Resume
SUPPORT
User's Manual
Latest Firmware: